DLP 3D shutter glasses and transmitter family 4 pack for your compatible 3D HDTV (computer or converter required for some 3D content) Review

Average Reviews:

(More customer reviews)These are the glasses and transmitter that you need for 3D on your set, the only warning that I can give you is that a stand alone 3D blue ray player will not work with your Samsung 3D ready DLP tv... you must have a computer connected by HDMI to your HDMI/DVI port and you need to be using Cyberlink Power DVD 10 if you want to play 3D Blue Ray. There are other players that will let you play 3D DVD's but the Cyberlink software is the only way to get 3D blue ray on your 3D ready DLP. You may ask why won't a 3D blue ray player work? Because they use a newer version of HDMI which you don't have. Also, as I stated before you have to have the computer connected to the only HDMI port that is also a DVI port because, here's the kicker, your set works with this other format, which they abandoned. See the lessons we learn from being the first to purchase a new technology! One other note on these glasses... They work and most of the others will not, here's why: The DLPs work at a much higher sync rate in 3D mode, which is awsome but once again, something they abandoned. Other glasses will not operate at this frame rate (120 hz) and will not work with your system. Please learn from my experience and save yourself the headache and expense of trying to get your DLP to work any other way... You need a computer, Cyberlink Power DVD 10, these glasses with the included transmitter that plugs into you 3D port on your TV. Then WOW!!!

Click Here to see more reviews about: DLP 3D shutter glasses and transmitter family 4 pack for your compatible 3D HDTV (computer or converter required for some 3D content)

This bundle is the ULTIMATE way to view 3D on your 3D-ready Mitsubishi or Samsung DLP HDTV! Simply hook your computer to the TV, connect the transmitter and glasses and enjoy your 3D content. Note that 3D software is required to view 3D movies, DVDs or Blu ray discs. For DVDs & movies, Stereoscopic player is recommended. For 3D Blu rays, a Blu ray drive is required and Power DVD 10 Ultra 3D is recommended). These glasses can also be used to play PC games in true 3D! This pack includes: 4 pair of wireless glasses and 1 wireless transmitter. This pack is compatible with the following Samsung DLP monitors (& any other 3D Ready televisions not listed): HL-50A650 HL-56A650 HL-61A650 HL-61A750 HL-67A750 HL-72A650 HL-T4675S HL-T5075S HL-T5076S HL-T5087S HL-T5089S HL-T5675S HL-T5676S HL-T5687S HL-T5689S HL-T6176S HL-T6187S HL-T6189S HL-T7288W and with the following Samsung Plasma monitors(& any other 3D Ready televisions not listed): PN42A450P PN50A450P PS42A450 PS42A450P1 PS50A450 PS50A450P1 PS50A476 Alsowith the following Mitsubishi DLP monitors (& any other 3D Ready televisions not listed): WD-60C9 WD-65C9 WD-73C9 WD-57833 WD-60735 WD-60737 WD-65735 WD-65736 WD-65737 WD-65833 WD-65835 WD-65837 WD-73735 WD-73736 WD-73737 WD-73833 WD-73835 WD-73837 WD-82737 WD-82837.PC System Requirements: Intel® Pentium 4 1.6GHz or Athlon XP 512MB RAM DirectX 9.0c compatible graphics card * 100MB free disk space Windows® XP, Vista or 7, DirectX 9.0c compatible sound card Internet connection DVD-ROM drive Network card * NOTE: VGA to HDMI cable or DVI to HDMI adaptor is required for VGA or DVI cards.These glasses were created for use with a PC, however, they will work great with Mitsubishi 3D TVs using the optional 3DA-1 adapter.Although these glasses CAN work with the 3DC-1000 starter kit using the included emitter, they are NOT compatible with emitter included with the starter kit.For compatible glasses, please use this URL:http://www.amazon.com/gp/product/B0047UIA7O

Buy cheap DLP 3D shutter glasses and transmitter family 4 pack for your compatible 3D HDTV (computer or converter required for some 3D content) now.

Aitech Pro PC/TV Wireless PC to TV Converter (06-078-001-08) Review

Average Reviews:

(More customer reviews)Well, I thought I'd write a review on this since no one else has.
First off the good. This product does transmit wireless sound and video to your home TV. Works great, pictures good quality, not great, but that could be because my TV is old, I'll know for sure this week when i get my New 42' in.
The bad: Distance is a real issue, you can't get the reciever to far away from the transmitter or you get bad video quality with many breaks in the feed. If your in another room, you can forget about it. The devices themselfs feel very cheap, and if you use any type of wireless internet, forget this product. The wireless net interferes with this product and you done get ANY video.
This does seem to work well when you've got line of sight from pc to tv, my max distance is at about 10 foot, then i run outta room . Works good, but could have been a great product.

Click Here to see more reviews about: Aitech Pro PC/TV Wireless PC to TV Converter (06-078-001-08)

AITech Pro PC/TV Wireless Scan Converter 06-078-001-08 Signal Converters

Get 24% OFF

Buy cheap Aitech Pro PC/TV Wireless PC to TV Converter (06-078-001-08) now.

PYLE PLVW1342R 13.4-Inch TFT Roof Mount Monitor and IR Transmitter Review

Average Reviews:

(More customer reviews)You have to be looking right straight dead on with this thing! The contrast and brightness is horrible. Hard to find a happy medium. You riase the brightness, becuase dark scenes look "silver" and are not viewable. The a scene with a lot of white in it comes on and the whole thing is washed out.
Really would stay away from this one.

Click Here to see more reviews about: PYLE PLVW1342R 13.4-Inch TFT Roof Mount Monitor and IR Transmitter

Keep the backseat busy with this 13.4" TFT active matrix root mount monitor! This 800 x 600 monitor features an overhead console with flip bracket, so it easily hides away for safety purposes. The off-axis visibility is great, so you don’t need to look head on to get a crystal-clear, accurate picture – but this monitor also rotates 45 degrees left/right. This monitor is equipped with two audio-video inputs, so you can hook up your DVD player and video game console at the same time. Adjust the settings on the on-screen display menu using the front panel buttons or the included wireless remote control. And when you want to listen in private, use the included IR transmitter with a pair of wireless IR headphones for a quiet ride. Requires 12 V DC.

Get 60% OFF

Buy cheap PYLE PLVW1342R 13.4-Inch TFT Roof Mount Monitor and IR Transmitter now.

Single X10 POWERMID TRANSMITTER Review

Average Reviews:

(More customer reviews)I have 3 transmitters and one receiver. Here's how I set it up: plug in receiver and point it at the AVR. Test to make sure it pointed correctly and it was on the first try. Then I placed the transmitters in their respective zones. Point the remote at a transmitter and it works. It couldn't have been easier.

Click Here to see more reviews about: Single X10 POWERMID TRANSMITTER

If you have speakers or TVs in a separate room from your stereo/VCR/cable box, you know how inconvenient it is to adjust the volume, change DSS channels, radio stations, etc. Infrared (IR) remotes do not work through walls. You have to walk into the other room any time you want to make a change. With the PowermidTM you can now control your equipment through walls up to 100 ft. away.Point your remote at the PowermidTM Transmitter, it converts the IR signal into a radio frequency (RF) signal that can pass through walls. In the room where your audio/video equipment is located, the receiver converts the RF signal back into IR and transmits it to your equipment.The transmitter even blinks a red light to indicate that it is receiving your command.You'll need this item if you need to control equipment from more than one room. (Receiver sold seperately.)

Get 30% OFF

Buy cheap Single X10 POWERMID TRANSMITTER now.

2 Watt Wireless AV Transmitter Receiver Kit Review

Average Reviews:

(More customer reviews)Quite disappointed with the performance for it has a very serious frequency interference problems. No matter what channel I selected by flipping the correspondent dip switch on the products as described in the typo-flushed user manual, it always picks up the frequency from the microwave oven and the Internet wireless router, and distorts and scrambles the screen display badly. I even tried to setup the transmitter and the receiver in a way such that the distance between the two is only 10 ft away, but the situation still does not improve a bit. I think you would love this product only if you shut of all the microwave oven, wireless router and any devices that emits 2.4GHz wave.

Click Here to see more reviews about: 2 Watt Wireless AV Transmitter Receiver Kit

BADA 2W High Power Audio/Video Transmitter/Receiver KitThis hot new item sends Stereo Sound and Video from your TV, VCR , Hi-Fi System or Satellite system through floors, or ceiling to a TV or speakers in another room--up to 300 feet away! It uses 2.4GHz signal and FM modulation for superior performance.Sends high-quality TV/satellite system/VCR signals to a second TV, anywhere in your home. Link your camcorder to your TV for home or business security.Frequency : 4 Channel 2.4Ghz (CH1=2.414Ghz, CH2=2.432Ghz, CH3=2.450Ghz, CH4=2.468Ghz)Output Connectors : Gold-plated audio/video RCA jacks.A/V Connecting cable not included.Powered by 12V DC. (Power Adapter included)

Buy cheap 2 Watt Wireless AV Transmitter Receiver Kit now.

XtremeMac AirPlay FM Transmitter for iPod and iPod Mini Review

Average Reviews:

(More customer reviews)I bought this unit after trying the Itrip by Griffen Technologies which I found to be unsatisfactory. This unit does the job. In my car and on my boat, the Airplay works very well, even here in Southern California where there really aren't any completely clear FM frequencies. The Airplay seems to have much more power than at least two other FM transmitters I have tried, which enable it to function very well.
Setting up the Airplay is simplicity itself; one simply plugs it into the top of the Ipod and dial in the desired FM frequency. No software to deal with. Make sure that the volume control of the Ipod is at about 60-70%--this is the only critical setting. The Airplay has greatly enhanced my enjoyment of the Ipod by enabling me to use the Ipod anywhere I have an FM radio, thereby letting me use the nice speaker systems in my boat and car. Great! One day, of course, car and marine stereos will have Ipod docks. But until that happy day, the Airplay will be there for us.

Click Here to see more reviews about: XtremeMac AirPlay FM Transmitter for iPod and iPod Mini

irPlay is the first and only iPod-powered FM Transmitter that works across the full FM frequency band without the need to install software. Allowing iPod users to play audio wirelessly from their iPod through any FM radio,

Get 69% OFF

Buy cheap XtremeMac AirPlay FM Transmitter for iPod and iPod Mini now.

Cables To Go Impact Acoustics 40430 Infrared (IR) Remote Control Repeater Kit (Black) Review

Average Reviews:

(More customer reviews)This product works GREAT and is very inexpensive compared to others. I recommend using this product over wireless repeaters for reliability and cleanliness of installation.
PROS: Very neat installation and very accurate repeater for a complete system using a Sony 52 inch LCD. Ample wires and expansion capability. Feels like a well built product with clear labeling on the box for easy installation. I added a standard 12 foot long 3.5mm M/F stereo extension cable to lengthen the 10 foot IR Receiver cable that was included in the kit. This allowed me to put the IR receiver on the TV (wall mounted Sony) and put the box in the equipment closet 12 feet away. It worked flawlessly. They should advertise this capability on the Cables to Go website.
CONS: The double back tape on the IR Transmitters seemed kinda week. I don't think they'll fall off over time, but actually might. The IR transmitter plugs pop out of the box very easily. I think they are using the wrong plug/socket combination in the design; they work, but come out VERY easily when they should 'click' in like the IR receiver and power plug do. The power cord is the same plug as all the other ports. It is easily confused with the port next to it labeled "Status". The unit will not work if the power is in the "Status" port, but when miswired, does not fry the unit either. (Uh, don't ask how I learned this...)
Great Product. Highly Recommended. 9 out of 10 for the IR Transmitters not locking in correctly.

Click Here to see more reviews about: Cables To Go Impact Acoustics 40430 Infrared (IR) Remote Control Repeater Kit (Black)

Does your entertainment system have wooden doors, or would you like to mount your components in a closet? Without a clear line of sight infrared (IR) signals from a remote control will not reach the equipment. We have the answer. Our remote control repeater kit contains all equipment necessary to remotely operate 4 components (expandable to 12 components) using your standard remotes. Mount the IR receiver in a central location and connect to the IR distribution block. This block repeats the signals through emitters to your electronic components. Your components may now be mounted in your entertainment center, closet or another room! The kit is self-contained and easy to connect.With this kit, you may mount a receiver in a convenient place on or near your entertainment system. The receiver has a 9 foot cable that is then attached to the repeater system that is mounted in your entertainment cabinet. The kit includes 4 emitters. These emitters are connected from the repeater system and placed over the IR receiver of the equipment.The IR receiver and IR repeater have blinking blue LEDs to confirm receipt of the IR signal; the IR repeater is designed for mounting on shelf or wall. You can use your existing remotes for simple installation and hookups. Packaged for resale.For your convenience, the AC/DC Adapter (#98025) is available for this item

Get 50% OFF

Buy cheap Cables To Go Impact Acoustics 40430 Infrared (IR) Remote Control Repeater Kit (Black) now.